Our Services

Explore the inspection and machinery management service

An inspector checks a newly installed lift in its shaft

Initial Inspection

The Initial Inspection process is for any new machinery(s) without an existing Certificate of Fitness (CF) and PMA/PMD/PMT registration number.

Scope of Services

PMA Lifting and Hoisting Machine
PMD Boilers
PMT Pressure Vessels
An inspector checks the drive under an escalator

Periodical Inspection

The CF Renewal (Periodical) Inspection is applicable for the following scenarios:

  1. i. Expiring or Expired CF

    For existing PMA/PMD/PMT machinery where the Certificate of Fitness (CF) is about to expire or has already expired.

  2. ii. Disassembled for Repair (No Relocation)

    For machinery where the CF has become void due to disassembly during repairs, without any relocation.

  3. iii. Relocated Machinery (PTI Required)

    For machinery where the CF has become void due to physical relocation (e.g., tower crane relocation), which requires a new Permission-To-Install (PTI) from DOSH.

Owner updating records on a computer

Transfer of Ownership

The Transfer Of Ownership (TOO) function allows the transfer of registered machineries between two different owners in MyInspector. This function is not available for machinery(s) without a PMA/PMD/PMT number or for machinery marked as "Decommissioned".

An inspector checks the valves of a pressure vessel

Repair Machinery Notification

This process is for notifying MyInspector when any certificated machinery has been dismantled for repairs or has already been repaired.

  1. 1. Owner/Operator Obligation

    It is the duty of certificated machinery owners or operators to notify DOSH and update MyInspector for any machinery that will undergo or has undergone repair work. (Refer to: Occupational Safety and Health (Plant Requiring Certificate of Fitness) Regulations 2024, Part IV – Miscellaneous, Repairs, Clause 9(1))

  2. 2. Certificate of Fitness (CF) Status

    The Certificate of Fitness (CF) becomes void for any machinery that has been repaired, unless a special exemption is granted by DOSH. (Refer to: Occupational Safety and Health (Amendment) Act 2022 [Act A1648], Clause 27D(8))

Machinery loaded on a lorry in a factory

Change Machinery Location

Change machinery location is the process of updating a machinery's existing location to a new one. This may void your existing Certificate of Fitness (CF) as it involves dismantling of the machinery and a new Permission-To-Install (PTI) from DOSH is required.

(Refer to: Occupational Safety And Health (Amendment) Act 2022 (Act A1648) Clause 27D (8))